.338 Lapua Magnum

From Wikipedia, the free encyclopedia

Jump to: navigation, search
.338 Lapua Magnum

A .338 Lapua Magnum (right) compared to a .300 Winchester Magnum (centre) and .308 Winchester cartridge (left)
Type Rifle
Place of origin Flag of Finland Finland
Service history
Used by Multiple official and civil users
Wars Afghanistan War, Iraq War
Production history
Designer Lapua
Designed 1989
Produced 1989 - present
Specifications
Parent case .416 Rigby
Case type Rimless, bottleneck
Bullet diameter 8.58 mm (0.338 in)
Neck diameter 9.46 mm (0.372 in)
Shoulder diameter 13.82 mm (0.544 in)
Base diameter 14.91 mm (0.587 in)
Rim diameter 14.93 mm (0.588 in)
Rim thickness 1.52 mm (0.060 in)
Case length 69.20 mm (2.724 in)
Overall length 93.50 mm (3.681 in)
Case capacity 7.40 cm³ (114 gr H2O)
Rifling twist 254 mm (1-10")
Primer type Large rifle magnum
Maximum pressure 470 MPa (68,000 psi)
Ballistic performance
Bullet weight/type Velocity Energy
200 gr (13 g) SP 3,344 ft/s (1,019 m/s) 4,967 ft·lbf (6,734 J)
250 gr (16 g) Partition 2,942 ft/s (897 m/s) 4,806 ft·lbf (6,516 J)
250 gr (16 g) Lapua Scenar GB488 VLD 2,970 ft/s (910 m/s) 4,893 ft·lbf (6,634 J)
275 gr (17.8 g) SP 2,813 ft/s (857 m/s) 4,833 ft·lbf (6,553 J)
300 gr (19 g) Sierra HPBT MatchKing 2,717 ft/s (828 m/s) 4,919 ft·lbf (6,669 J)
Test barrel length: 26" (660 mm)
Source: Accurate Powder[1] Lapua (27" (690 mm) barrel)[2]

The .338 Lapua Magnum (8.6x70mm or 8.58x70mm) is a specialized rimless bottlenecked centerfire cartridge developed for military long-range sniper rifles. The Afghanistan War and Iraq War made it a combat-proven round with ready and substantial ammunition availability. The .338 Lapua is a dual-purpose anti-personnel and anti-material round; however, its anti-material potential is limited, due to the bullet's lower kinetic energy compared with that of the .50 BMG's 35.64 to 55.08 gram (550 to 850 grain) projectiles. The loaded cartridge is 14.93 mm (0.5878 in) in diameter (rim) and 93.5 mm long. It can penetrate better-than-standard military body armour at ranges up to 1000 meters (1094 yd) and has a maximum effective range of about 1750 meters. Muzzle velocity is dependent on load and powder temperature and varies from 880 to 915 m/s (2887 to 3002 ft/s) for commercial loads with 16.2 gram (250 grain) bullets, which results in about 6525 Joule (4813 ft•lbf) of muzzle energy.

In addition to its military role, it is increasingly used by big-game hunters and civilian long-range shooting enthusiasts. The .338 Lapua Magnum is suitable for hunting any game animal on the planet, though certain sub-Saharan Africa countries have a 9.53 mm (.375 in) minimum caliber rule for hunting Big Five game. It also cannot be used in countries which ban civil use of former or current military rifle cartridges.

Contents

In 1983, Research Armament Co. in the USA began development of a new, long-range sniper cartridge capable of firing a 16.2 gram (250 gr), .338-inch diameter bullet at 914 m/s (3000 ft/s) that could penetrate 5 layers of military body armor at 1000 m (1094 yd) and still make the kill. After preliminary experiments, a .416 Rigby case necked down to take a .338-inch bullet was selected, since this diameter presents an optimum of sectional density and penetrating capability for practical spin stabilized rifle bullets (bullets up to about 5 to 5.5 calibers in length).[3] The .416 Rigby is an English big game cartridge that was designed to accommodate 325 MPa (47137 psi) pressures. One of the disadvantages to these old cartridge cases intended for firing cordite charges instead of modern smokeless powder is the thickness of the sidewall just forward of the web. During ignition, the cartridge's base, forward to the bolt face, is not supported. The case is driven back against the bolt face which results in the stretching of the case, particularly the sidewall immediately forward of the web. When the sidewall resists the outward expansion against the chamber, the pressure stretches the case thereby increasing its length resulting in the sidewall becoming thinner at that stretch point.

Brass Extrusion Labs Ltd. (B.E.L.L.) of Bensenville, Illinois, made the cases, Hornady produced bullets, and Research Armament built the rifle under contract for the U.S. Navy. Subsequently, Lapua of Finland put this calibre into production.[4] The program was later canceled when they were unable to make it meet the project's velocity target 16.2 gram at 914 m/s (250 gr at 3000 ft/s), due to weak brass cases.

From American origins, the current .338 Lapua Magnum cartridge was developed as a joint venture between the rifle building company Accuracy International and ammunition manufacturer Lapua (personal communication with Malcolm Cooper, the now-deceased founder of Accuracy International). In some contrast to this Lapua states on its website it developed the cartridge and mentions Mr. Cooper's Accuracy International as a cooperation partner.[5] Since Mr. Cooper can not comment on this matter it can not be resolved. In the .338 Lapua Magnum cartridge case design, particular attention was directed toward thickening and metallurgically strengthening the case's web and sidewall immediately forward of the web. In modern solid head cases, the hardness of the brass is the major factor that determines a case's pressure limit before undergoing plastic deformation. Lapua tackled this problem by creating a hardness distribution ranging from the head and web (hard) to the mouth (soft) as well as a strengthened (thicker) case web and sidewall immediately forward of the web. This resulted in a very pressure resistant case, allowing it to operate at high pressure and come within 15 m/s (50 ft/s) of the original velocity goal. Lapua also designed a 16.2 gram (250 gr) .338 calibre Lock Base B408 full metal jacket bullet, modelled after its .30 calibre Lock Base bullet configuration. The result was the .338 Lapua Magnum cartridge which was registered with CIP (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) in 1989. With the procurement by the Dutch Army, the cartridge became NATO codified.

The .338 Lapua Magnum is considered an ideal military long-range anti-personnel cartridge by long-range sniping specialists like John D. Taylor and Dean Michaelis. It fills the gap between weapons chambered for standard military rounds such as the 7.62x51mm NATO and large, weighty rifles firing the .50 BMG cartridge. It also offers a tolerable amount of barrel wear, which is important to military snipers who tend to fire thousands of rounds in practice every year to acquire and maintain expert long-range marksmanship.[6] Good factory loads, multiple projectile weights and factory special application ammunition are all available.[7][8]

Due to its growing civilian popularity, several high quality tactical and match (semi) custom bolt actions designed for the .338 Lapua Magnum are becoming available. These (semi) custom bolt actions are used with other high grade rifle and sighting components to build custom sporting and target rifles. Such rifles are ordered by long-range accuracy oriented shooters and built by specialized, highly skilled gunsmiths and can cost thousands of euros or dollars. When built to expectation such rifles are very accurate - 0.5 MOA or better consistent accuracy for a particular rifle with optimized ammunition is considered normal. Only expert marksmen can make use of this extreme accuracy potential.

The .338 Lapua Magnum cartridge is in law enforcement or military[9][10] use with:

The Accuracy International AWSM rifle chambered in .338 Lapua Magnum is currently (2007) in service with the British Army and Royal Marines in Afghanistan and Iraq.

The .338 Lapua Magnum has been designated a "cartridge of interest" by the National Defense Industrial Association (NDIA). It is being groomed to replace the .300 Winchester Magnum and the .50 BMG for anti-personnel long-range service in the US Military.[citation needed]

Extremely thick-walled brass results in a 7.40 ml (114 grains) H2O cartridge case capacity for the .338 Lapua Magnum. The exterior shape of the case was designed to promote reliable feeding and extraction in bolt action rifles and machine guns alike, under extreme conditions.

.338 Lapua Magnum maximum CIP cartridge dimensions. All sizes in millimeters (mm).

Americans would define the shoulder angle at alpha/2 ≈ 20 degrees. The common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 6 grooves, Ø lands = 8.38 mm, Ø grooves = 8.58 mm, land width = 2.79 mm and the primer type is large rifle magnum.

According to the official CIP guidelines the .338 Lapua Magnum case can handle up to 470 MPa (68,167 psi) piezo pressure. In CIP regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum CIP pressure to certify for sale to consumers.

Lapua corrects this for rifles very high value to 420 MPa (60,915 psi) piezo pressure in the From an American dream to a Finnish success story article by Janne Pohjoispää. To further complicate matters the mentioned 56000 CUP CIP copper crusher pressure in this article would translate in ≈ 447.5 MPa (64903 psi) CIP piezo pressure according to a study on the conversion from cup to psi for rifle cartridges by Denton Bramwell.[13] The official CIP piezo guideline is corroborated by Lapua Australia in the History and development of the .338 Lapua Magnum article by Alan C. Paulson. A reverse engineering simulation with QuickLOAD internal ballistic software predicted that Lapua load their factory .338 Lapua Magnum ammunition at ≈ 420 MPa (60,915 psi) piezo pressure as Alan C. Paulson asserts in his article.

The large boltface combined with the high maximum pressure makes that the .338 Lapua Magnum should only be chambered in rifles that are capable of handling such large and fierce cartridges and thus high bolt thrust safely. Chambering such powerful super magnum cartridges in rifles intended for normal magnum rifle cartridges and using high pressure loads can cause serious or fatal injury to the shooter and bystanders.

The American .338-378 Weatherby Magnum cartridge introduced in 1998 and the American .338 Remington Ultra Magnum (.338 RUM) cartridge introduced in 2000 are probably the closest currently (2007) commercially available ballistic twins of the .338 Lapua Magnum. The .338-378 Weatherby Magnum is however a belted cartridge and the .338 Remington Ultra Magnum is a rebated rim cartridge.

For a typical .338 Lapua Magnum high end factory military sniper rifle like the Sako TRG-42 with a 690 mm (27.17 in) long 1 in 12 inch rifling twist rate barrel at sea level, 1500 m (1647 yd) is considered to be the maximum shooting distance for man sized targets when using standard Lapua military loads. The 16.2 gram (250 gr) Lapua Scenar GB488 bullet (G1 BC = 0.675), for which the Sako TRG-42 with its 1 in 12 inch twist rate was optimized, has a supersonic range of 1500 m under warm summer conditions at a muzzle velocity of 915 m/s (3002 ft/s). However, to be able to maintain over 90% hit probability on non-moving targets, this maximum shooting distance has to be reduced to 1300 m (1422 yd) at freezing point conditions or 1100 m (1312 yd) in Arctic winter conditions, when the muzzle velocity may drop to 880 m/s (2887 ft/s). Only during optimal warm summer conditions (muzzle velocity increases up to 915 m/s (3002 ft/s)) the maximum shooting distance of 1500 m (1647 yd) is realistically achievable.

Loaded with more aerodynamic .338 calibre bullets than the ones Lapua uses such as the Sierra HPBT Match King .338 19.44 gram (300 gr) bullet (G1 BC ≈ 0.768) or the Lost River Ballistics J40 .338 17.5 gram (270 gr) CNC manufactured mono-metal bullet (G1 BC = 0.871) the long-range performance and maximum range of .338 Lapua Magnum rifles can be extended. These longer very-low-drag bullets require a 1 in 10 inch twist rate to stabilize them. The .338 17.5 gram Lost River Ballistic Technologies J40 match bullet (G1 BC = 0.871) is one of the most aerodynamic .338 calibre bullets available. It has a 1829 m (2000 yd) supersonic range under optimal warm summer conditions at a muzzle velocity of 869 m/s (2850 ft/s). This makes engaging static targets up to 1800 m (1969 yd) feasible.

Improvement beyond this standard while still using standard .338 Lapua Magnum brass is possible, but the bullets have to be very long and the normal cartridge overall length of 93.5 mm has to be exceeded. The common 1:10 inch rifling twist rate also has to be tightened to stabilize very long projectiles. Such commercially non-existent cartridges are termed "wildcats". The use of a wildcat .338 Lapua Magnum based cartridge demands the use of a custom or customized rifle with an appropriately cut chamber and a fast-twist bore. An example of such a special .338 calibre extreme range bullet is the German CNC manufactured mono-metal 18.92 gram (292 gr) LM-105 (G1 BC ≈ 1.133 – this Ballistic coefficient (BC) is calculated by its designer, Mr. Lutz Möller, and not proven by Doppler radar measurements). If Mr. Möller's assumptions are right the LM-105 would have a supersonic range of ≈ 2400 m (2625 yd) at a muzzle velocity of 915 m/s (3002 ft/s). The LM-105 bullet has an overall length of 54.79 mm (2.157 in) and derives its exceptional low drag from a radical LD Haack or Sears-Haack profile in the bullet's nose area. Rifles chambered for this wildcat cartridge, with a cartridge overall length of 105 mm (4.13 in), and equipped with custom made 1:7 inch progressive twist rate[14] 900 mm (35.43 in) long barrels finished first and second at several long range competitions. It’s most recent win (2007) was in an international Special Forces and police sniper competition in Switzerland against rifles chambered for .308 Winchester up to .50 BMG at ranges from 100 m – 1500 m (109 yd – 1640 yd). The LM-105 bullet exhibited its very low wind drift susceptibility notably at ranges beyond 800 m (875 yd).[15]

The commercially successful .338 Lapua Magnum cartridge has functioned as the parent case for the .300 Lapua Magnum, which is essentially a necked-down version of the .338 Lapua Magnum. The .338 cartridge case was used for this since it has the capability to operate with high chamber pressures which, combined with smaller and hence lighter bullets result in very high muzzle velocities.

The Finnish ammunition manufacturer Lapua got the .300 Lapua Magnum CIP certified, so it became an officially registered and sanctioned member of the Finnish "family" of super magnum rifle cartridges. The .300 Lapua Magnum is not commercially available and currently exists only as a CIP datasheet. It is however still used by a few shooters who produce the cases from .338 Lapua Magnum brass by reshaping the shoulder and neck, and handloading it with .30 calibre bullets.

The .300 Lapua Magnum has a 7.33 ml (113 grains) H2O cartridge case capacity. The exterior shape of the Lapua Magnum case was designed to promote reliable feeding and extraction in bolt-action rifles and machine guns alike, under extreme conditions.

.300 Lapua Magnum maximum CIP cartridge dimensions. All sizes in millimeters (mm).

Americans would define the shoulder angle at alpha/2 ≈ 25 degrees. The common rifling twist rate for this cartridge is 240 mm (1 in 9.45 in), 4 grooves, Ø lands = 7.62 mm, Ø grooves = 7.82 mm, land width = 4.47 mm and the primer type is large rifle magnum.

According to the official CIP guidelines the .300 Lapua Magnum case can handle up to 470 MPa (68,167 psi) piezo pressure. In CIP regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum CIP pressure to certify for sale to consumers.

This for rifles very high maximum allowed chamber pressure level indicates that the cases of the .300 and .338 Lapua Magnum are built extremely sturdy to cope with this for rifles very high operating pressure. The large boltface combined with the high 470 MPa maximum pressure makes that the .300 Lapua Magnum should only be chambered in rifles that are capable of handling such large and fierce cartridges and thus high bolt thrust safely. Chambering such powerful super magnum cartridges in rifles intended for normal magnum rifle cartridges and using 470 MPa loads can cause serious or fatal injury to the shooter and bystanders.

The .338 Lapua Magnum case is also used as the parent case for a host of modified variants that neither are officially registered with and sanctioned by CIP nor its American equivalent, SAAMI. Such cartridges which use commercial factory cases are generally known as wildcats. By blowing out standard factory cases the wildcatter generally hopes to gain extra muzzle velocity by increasing the case capacity of the factory parent cartridge case by a few percent. Practically there can be some muzzle velocity gained by this method, but the measured results between parent cartridges and their 'improved' wildcat offspring are often marginal. Besides changing the shape and internal volume of the parent cartridge case, wildcatters also can change the original calibre. A reason to change the original calibre can be to comply with a minimal permitted calibre or bullet weight for the legal hunting of certain species of game. Because the .338 Lapua offers a large and exceptionally sturdy, pressure resistant cartridge case that can be relatively easily reloaded and hence be reused several times it has become quite popular amongst wildcatters. With the .338 Lapua Magnum as the parent case wildcatters have created 7 mm (7 mm Katzmeier), .30 (.30-338 Lapua (Triebel), .30 Wolf), 8 mm (8 mm-338 Lapua (Triebel), LM-101), .338 (.338 Yogi, LM-105), 9.3 mm (9,3-338 Lapua Magnum (Triebel)) and .375 calibre variants.

  1. ^ .338 Lapua at Accurate Online
  2. ^ Lapua product brochure .338 Lapua Magnum ammunition
  3. ^ What is the Maximum Length of a spin stabilized Projectile? by Mr. Beat Kneubühl
  4. ^ Barnes, Frank C., Cartridges of the World 8th Edition, Edited by M.L. McPherson, DBI Books, 1997, ISBN 0-87349-178-5
  5. ^ From an American dream to a Finnish success story
  6. ^ The Finnish Army found out during a test/trails program and 7 years of actual service that the barrels of their Sako TRG-42 sniper rifles lasted 7000 to 8000 rounds with Lapua Lock Base B408 factory ammunition before showing impermissible accuracy decay. The Finnish Army consistent accuracy requirement for these rifles is ≤ 1 MOA at 1000 m. If this requirement is not met the TRG-42 gets a new barrel. This is normal practice for active high performance precision rifle operators who regard barrels as expendable items. The continuous use of very powerful handloads (which results in higher muzzle velocities) resulted in much quicker throat erosion reducing the TRG-42 barrels accuracy life to 1500 to 2000 rounds.
  7. ^ In 1985, the US military Adjutant General's Office issued a legal opinion holding that the Sierra MatchKing bullet (and similar bullets of other manufacturers), despite being a hollowpoint design, is not designed specifically to cause greater damage or suffering in a human target, and in fact normally does not create a wound readily distinguishable from wounds caused by conventional full metal jacket bullets, and is therefore in their opinion legal under the Hague Convention for use in war.
  8. ^ Sniper Use of Open-Tip Ammunition
  9. ^ worldrifles.com
  10. ^ World Small Arms Inventory
  11. ^ Canadian Forces Rifle — the 8.6mm C14 Timberwolf MRSWS
  12. ^ Waffen HQ Russian Infantry weapons
  13. ^ Correlating PSI and CUP, a study done that shows a high correlation between CUP and PSI for rifle cartridges by Denton Bramwell
  14. ^ Progressive twist rate barrels
  15. ^ LM-105 "Dominator"

Retrieved from "http://en.wikipedia.org/wiki/.338_Lapua_Magnum"
Advanced Search
Included Web Search Engines


Safe Search

close

Top Matching Results

Occasionally Search.com will highlight specialized results that are based on the context of your query. Examples of specialized results include specific links to news, images, or video.

Top Matching Results may highlight information from other Search.com pages, content from the CNET Network of sites, or third party content. The listings are based purely on relevance. Search.com does not receive payment for listings in this section but our partners that provide this data may get paid for listing these products.

Sponsored Links

This section contains paid listings which have been purchased by companies that want to have their sites appear for specific search terms and related content. These listings are administered, sorted and maintained by a third party and are not endorsed by Search.com.

Search Results

Search.com sends your search query to several search engines at one time and integrates the results into one list which has been sorted by relevance using Search.com's proprietary algorithm. You can customize the list of search engines included in your metasearch from the preferences.

The search engines that are used in your metasearch may allow companies to pay to have their Web sites included within the results. To view the Paid Inclusion policy for a specific search engine, please visit their Web site. Search.com does not accept payment or share revenue with any search engine partner for listings in this section.