Sources
Help build the largest human-edited directory on the web.
Submit a site - Become an editor
Wikipedia. Licensed under the GNU Free Documentation License.
Are you an expert in this subject? Join the discussion and share your knowledge at Wikipedia.org.
.41 Action Express
From Wikipedia, the free encyclopedia
| .41 Action Express | ||
|---|---|---|
| Type | Handgun | |
| Place of origin | USA | |
| Production history | ||
| Designer | Evan Whildin | |
| Designed | 1986 | |
| Manufacturer | Action Arms | |
| Specifications | ||
| Case type | Rimless, straight | |
| Bullet diameter | .410 in (10.4 mm) | |
| Neck diameter | .434 in (11.0 mm) | |
| Base diameter | .435 in (11.0 mm) | |
| Rim diameter | .394 in (10.0 mm) | |
| Rim thickness | .045 in (1.1 mm) | |
| Case length | .866 in (22.0 mm) | |
| Overall length | 1.17 in (30 mm) | |
| Rifling twist | 16-18 | |
| Primer type | Small pistol | |
| Ballistic performance | ||
| Bullet weight/type | Velocity | Energy |
| 170 gr (11 g) JHC | 940 ft/s (290 m/s) | 334 ft·lbf (453 J) |
| 180 gr (12 g) HP | 890 ft/s (270 m/s) | 317 ft·lbf (430 J) |
| 210 gr (14 g) XTP | 797 ft/s (243 m/s) | 296 ft·lbf (401 J) |
| Source: Hodgdon [1] | ||
The .41 Action Express is a pistol cartridge originating from the 1980s to reproduce performance of the .41 Magnum cartridge in semi-automatic pistols.[2]
Contents |
The .41 Action Express (41 AE) was designed by Evan Whildin, vice president of Action Arms, in 1986.[3] It was based on the .41 Magnum case, cut down to fit in a 9 mm frame, and using a rebated rim. The .41 AE is a very attractive cartridge in many ways, as the rebated rim allows a simple barrel and magazine change to allow many 9 mm guns to be converted to .41 AE.
The powerful 10 mm Auto cartridge, which had been suffering from poor acceptance from its start in the early 1980s, was eventually accepted by the FBI in a reduced power, subsonic loading. Smith & Wesson then decided that the 10 mm Auto was too much cartridge for the reduced power loading, and that the .45 ACP sized guns that chambered it were too heavy and bulky; out of this came the .40 S&W, a shortened 10 mm Auto case, designed to fit in a 9 mm sized gun, with a reduced pressure loading that allowed a lighter, easier to shoot gun. Because most ammunition manufacturers backed the very similar .40 S&W, there was little use for the .41 AE and production of both firearms and the ammunition itself was soon phased out.
The .41 AE is ballistically similar to the .40 S&W, to the point that many reloading manuals suggest using .40 S&W load data in the .41 AE. The .41 AE uses .410 inch bullets, whereas the .40 S&W uses .400 inch bullets. However, as it lacks the backing of ammunition manufacturers in making .410 caliber bullets suited to semiautomatic pistols, the .41 AE has not achieved widespread popularity.[4] [5]
In 1988, IMI also developed a 9 mm Action Express, which was a .41 AE necked down to 9 mm. It offered a much larger case capacity than the standard 9 mm case, allowing velocities that matched that of the .357 Magnum when loaded with light bullets. This move anticipated the parallel development of the .357 SIG from the .40 S&W in 1994.
- ^ ".41 Action Express (Pistol) data" from Hodgdon
- ^ Barnes, Frank C. [1965] (2006). in Skinner, Stan: Cartridges of the World, 11th Edition, Iola, WI, USA: Gun Digest Books, 330,338. ISBN 0-89689-297-2.
- ^ Reload Bench
- ^ SAAMI Pressures. Retrieved on 2007-11-29.
- ^ .40 Smith & Wesson/.41 AE. Retrieved on 2007-11-29.