Central Plaza, Hong Kong

From Wikipedia, the free encyclopedia

(Redirected from Central Plaza)
Jump to: navigation, search
Central Plaza
中環廣場[1]

Central Plaza by day in April 2003

Information
Location Flag of Hong Kong Hong Kong, China
Coordinates 22°16′48″N 114°10′25″E / 22.28, 114.17361Coordinates: 22°16′48″N 114°10′25″E / 22.28, 114.17361
Status Complete
Groundbreaking January 1989
Constructed 1989 - 1992
Use office, religious
Height
Antenna/Spire 374 m (1,227 ft)
Roof 309 m (1,014 ft)
Top floor 299 m (981 ft)
Technical details
Floor count 78 aboveground
3 belowground
Floor area 172,798 m² (1,859,982 sq ft)
Elevator count 39
Companies
Architect Dennis Lau & Ng Chun Man Architects & Engineers (HK) Ltd.
Developer The Sino Group, Sun Hung Kai Properties[2]

Central Plaza (traditional Chinese: 中環廣場) is the second tallest skyscraper in Hong Kong. With a height of 374 m / 1227 feet, Central Plaza is only surpassed by 2 IFC (415 m/1,362 ft) in Central. The building is located at 18 Harbour Road, in Wan Chai on Hong Kong Island. It used to be the tallest building in Asia from 1992 to 1996, until the Shun Hing Square in Shenzhen, People's Republic of China, was built. The 78-storey building was completed in August 1995. The building surpassed the Bank of China Tower as the tallest building in Hong Kong until the completion of 2IFC.

Central Plaza was also the tallest reinforced concrete building in the world, until it was surpassed by CITIC Plaza, Guangzhou. The building uses a triangular floor plan. On the top of the tower is a four-bar neon clock that indicates the time by displaying different colors in 15 minute intervals, blinking at the change of the quarter.

An anemometer is installed on the tip of the building's mast; the anemometer sits at 378 metres (1,240 ft) above sea level. The mast has a height of 102 m (335 ft). It also houses the world's highest church--Hong Kong City Church.

Contents

Main Lobby
Main Lobby

Central Plaza is made up of two principal components: a free standing 368 m (1,207 ft) high office tower and a 30.5 m (100 ft) high podium block attached to it. The tower is made up of three sections, a 30.5 m (100 ft) high tower base forming the main entrance and public circulation spaces, a 235.4 m (772 ft) tall tower body containing 57 office floors, a skylobby and five mechanical plant floors and the tower top consist of six mechanical plant floors and a 102 m (335 ft) tall tower mast.

The ground level public area together with the public sitting out area forming an 8,400 m² (90,400 sq ft) landscaped garden with richly ornate fountain, trees and artificial stone paving dedicated for public enjoyment. No commercial element is included in the podium. The first level is a public thoroughfare for three pedestrian bridges linking the Mass Transit Railway, the Convention and Exhibition Center and the China Resource Building. By turning these space to public use, the building got 20% plot ratio more as bonus. The triangular building shape of the tower is not truly triangular but with its three corners cut off to provide better internal office spaces.

The Sky Lobby
The Sky Lobby

The building was designed to be in triangular shape because it could provide 20% more of the office area to enjoy the harbour view as compared with the square or rectangular shaped buildings. From an architectural point of view, this arrangement could provide better floor area utilization, offering an internal column free office area with a clear depth of 9 to 13.4 metres and an overall usable floor area efficiency of 81%. Nonetheless, the triangular building plan causes the air handling unit (AHU) room in the internal core also assuming a triangular configuration and has only limited space. This makes the adoption of a standard AHU becomes not feasible. Furthermore, all air-conditioning ducting, electrical trunking and piping gathered inside the core area have to be squeezed into a very narrow and congested corridor ceiling void.

As the building is situated opposite to the HKCEC, the only way to get more sea view for the building and not to be obstructed by the neighbouring high-rise buildings is to build it tall enough. However, tall building would bring a lot of difficulties to structural and building services design, for example, excessive system static pressure for water systems, high line voltage drop and long distance of vertical transportation. All these problems if not properly resolved will increase the capital cost of the building systems and impair the safety operation of the building.

As a general practice, for achieving a clear height of 2.6 to 2.7 m (8.5 to 8.9 ft), a floor-to-floor height of 3.9 to 4.0 m (12.8 to 13.1 ft) would be required. However, because of high windload in Hong Kong for such a super high-rise building, every increase in building height by a metre would increase the structural cost by more than HK$1 million (HK$304,800 per ft). Therefore a comprehensive study was conducted and finally a floor height of 3.6 m (11.8 ft) was adopted. With this issue alone, an estimated construction cost saving for a total of 58 office floors, would be around HK$30 million. Yet at the same time, a maximum ceiling height of 2.6 m (8.5 ft) in office area could still be achieved with careful coordination and dedicated integration.

Hong Kong City Church lounge area in the Apex
Hong Kong City Church lounge area in the Apex
  • The site is a newly reclaimed area with a maximum water table rises to about 2 meters (6.5 ft) below ground level. In the original brief, a 6 storey basement is required, therefore a diaphragm wall design came out.
  • The keyword to this project is: time. With a briefing in a limited detail, the structural engineer needed to start work The diaphragm wall design allowed for the basement to be constructed by the top-down method. It allows the superstructure to be constructed at the same time as the basement, thereby removing time consuming basement construction period from the critical path.
  • Wind loading is another major design criterion in Hong Kong as it is situated in an area influenced by typhoons. Not only must the structure be able to resist the loads generally and the cladding system and its fixings resist higher local loads, but the building must also perform dynamically in an acceptable manner such that predicted movements lie within acceptable standards of occupant comfort criteria. To ensure that all aspects of the building's performance in strong winds will be acceptable, a detailed wind tunnel study was carried out by Professor Alan Davenport at the BLWT at UWO.

Steel structure is more commonly adopted in high-rise building. In the original scheme, an externally cross-braced framed tube was applied with primary/secondary beams carrying metal decking with reinforced concrete slab. The core was also of steelwork, designed to carry vertical load only. Later after a financial review by the developer, they decided to reduce the height of the superstructure by increasing the size of the floor plate so as to reduce the complex architectural requirements of the tower base which means a highstrength concrete solution became possible.

In the final scheme, columns at 4.6 m (15.1 ft) centres and 1.1 m (3.6 ft) deep floor edge beams were used to replace the large steel corner columns. As climbing form and table form construction method and efficient construction management are used in this project which make this reinforced concrete structure take no longer construction time than the steel structure. And the most attractive point is that the reinforced concrete scheme can save HK$230 million compared to that of steel structure. Hence the reinforced concrete structure was adopted and Central Plaza is now the tallest reinforced concrete building in the world.

In the reinforced concrete structure scheme, the core has a similar arrangement to the steel scheme and the wind shear is taken out from the core at the lowest basement level and transferred to the perimeter diaphragm walls. In order to reduce large shear reversals in the core walls in the basement, and at the top of the tower base level, the ground floor, basement levels 1 and 2 and the 5th and 6th floors, the floor slabs and beams are separated horizontally from the core walls.

Another advantage of using reinforced concrete structure is that it is more flexible to cope with changes in structural layout, sizes and height according to the site conditions by using table form system.

Wikimedia Commons has media related to:

Advanced Search
Included Web Search Engines


Safe Search

close

Top Matching Results

Occasionally Search.com will highlight specialized results that are based on the context of your query. Examples of specialized results include specific links to news, images, or video.

Top Matching Results may highlight information from other Search.com pages, content from the CNET Network of sites, or third party content. The listings are based purely on relevance. Search.com does not receive payment for listings in this section but our partners that provide this data may get paid for listing these products.

Sponsored Links

This section contains paid listings which have been purchased by companies that want to have their sites appear for specific search terms and related content. These listings are administered, sorted and maintained by a third party and are not endorsed by Search.com.

Search Results

Search.com sends your search query to several search engines at one time and integrates the results into one list which has been sorted by relevance using Search.com's proprietary algorithm. You can customize the list of search engines included in your metasearch from the preferences.

The search engines that are used in your metasearch may allow companies to pay to have their Web sites included within the results. To view the Paid Inclusion policy for a specific search engine, please visit their Web site. Search.com does not accept payment or share revenue with any search engine partner for listings in this section.