From Wikipedia, the free encyclopedia

Class (locomotive) refers to a group of locomotives built to a common design for a single railroad. It is analogous to ship class.

Contents 1 Development 2 Class system organization 2.1 First level: Wheel arrangement 2.2 Second level: Sequential model 2.3 Third level: Variants 3 Class Names 4 British Practice 4.1 Great Western Railway 4.2 Southern Railway 4.3 London, Midland and Scottish Railway 4.4 London and North Eastern Railway 5 See also

As locomotives became more numerous, the need arose to deal with them in groups of similar engines rather than as named or numbered individuals. These groups were named "classes" and at first tended to reflect capability rather than design. For example, the Baltimore and Ohio Railroad grouped its roster into four classes before the Civil War, though they had by that point dozens of different designs.

Later classes were based on design. A group of locomotives built off the same blueprints constituted a class, and if some of the locomotives in the class were sufficiently modified, a new class might be established for the modified examples. When electric locomotives were introduced, the same scheme was applied to them.

Since steam and early electric locomotives were usually custom built, classes were assigned by the railroad, and each railroad had its own system. Mergers of lines and sales of locomotives brought about changes of class. Early diesels were often fitted into the locomotive class system, but since they were generally not custom-built, the use of manufacturer model designations overtook the class system and made it irrelevant, except for historical discussion.

Usually the class system for a railroad was built on a simply hierarchy which assigned each class a code.

The first level was usually for the wheel arrangement and was usually coded by a letter of the alphabet. Different railroads used different codes, so that "J" on the New York Central Railroad meant a 4-6-4 (Hudson), while on the Norfolk and Western Railway it mean a 4-8-4 (Northern), and on the Baltimore and Ohio Railroad it denoted a 4-4-0 with a Wootten firebox.

Articulated locomotives were handled through two different methods. On many railroads each wheel arrangement was assigned its own unique letter, due to the limited number of arrangements that had to be represented. On other railroads this was insufficient, and commonly articulated locomotives were represented with a two letter code, one letter for the arrangement of each half. Therefore the Pennsylvania Railroad GG1 (UIC 2Co+Co2) is represented as if it were two ten-wheelers (4-6-0) coupled tail-to-tail.

A sequence number was often added to distinguish different designs of the same wheel arrangement. As a rule, the first design for a given arrangement had no sequence number, so that numbering stated at 1 with the second design for the wheel arrangement. For example, there were two main classes of 2-10-2 locomotives on the B&O. labelled "S" and "S-1".

Letter suffixes were often used to indicate variants in a basic design. Sometimes these also referred to specific characteristics; for example, for many years the Pennsylvania Railroad used a "s" suffix to indicate superheating, while on the B&O a "t" suffix indicated an engine with an oversize tender.

Most locomotives were given simple codes, but some classes were named, formally or not.

• The Union Pacific Big Boy class was said to have been given that name when it was scrawled on the smokebox of one at the factory.
• The Baltimore and Ohio Railroad P-7 class was referred to as the "President" class because initially each locomotive had the name of a U.S. President on the cab.
• Also on the B&O, the S and S-1 classes were referred to as "Big Sixes" because the road numbers began with 6.

• For recent practice see: British Rail locomotive and multiple unit numbering and classification

The old railway companies had various different systems of classification. Taking the "Big Four" companies which operated from 1923 to 1947:

The class number was usually taken from the first member of each class, e.g. "5700 Class" or "57XX Class" for locomotives in the number series beginning 5700.

• See: GWR locomotive numbering and classification

Each class was given a letter or number but these were not very meaningful. For example, the "700 Class" was a 0-6-0 and the "Q Class" was also a 0-6-0. See:

• SR locomotive numbering and classification
• SR multiple unit numbering and classification

Each locomotive was given a power classification, e.g. "3F". However, many different classes would have the same power classification so this was not helpful for identifying classes.

• See: LMS locomotive numbering and classification

The LNER's classification system was the most helpful to railway enthusiasts. Each wheel arrangement was given a letter (e.g. A for 4-6-2, B for 4-6-0, etc.) and this was followed by a number denoting the class (e.g. A1, B1, etc.).

• See: LNER locomotive numbering and classification

• Baltimore and Ohio Railroad locomotives
• PRR locomotive classification
• Locomotives of New Zealand