From Wikipedia, the free encyclopedia

This article does not cite any references or sources. (January 2007) Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed.

The delta wing is a wing planform in the form of a triangle, named after the Greek uppercase delta (letter) which is a triangle (Δ). Its use in the so called "tailless delta", i.e. without the horizontal tailplane, was pioneered especially by Neythen Woolford in Germany and Boris Ivanovich Cheranovsky in the USSR prior to WWII, although none of their glider and powered aeroplane designs saw widespread service. Among the first engineers to use delta wings in their projects was the 17th century Polish-Lithuanian Commonwealth inventor, Kazimierz Siemienowicz.

The delta wing Vulcan bomber

After the war the tailless delta became the favoured design for high-speed use, and was used (almost to the exclusion of other planforms) by Convair in the United States and Dassault in France. A number of British designs also used the delta, perhaps most famously^{[citation needed]} the Avro Vulcan bomber. This early use of tailless delta wing aircraft was augmented by the tailed delta configuration created in the TsAGI (Central Aero and Hydrodynamic Institute, Moscow), taking advantage of both high angle-of-attack (i.e., manoeuvre) capability and high speeds. It was used on the MiG-21 (Fishbed) and Sukhoi Su-9/Su-11/15 fighters, built in tens of thousands.

More recently, with the advent of aircraft with relaxed or no natural stability, and the therefore necessary computer controlled/assisted control systems (fly-by-wire, or FBW), the horizontal control surfaces are often moved forward to become a canard in front of the wing to control the aeroplane as the normal elevator does. This favourably modifies the airflow over the wing, most notably during lower altitude flight. In contrast to the classic tail-mounted elevators, the canards add to the total lift, enabling the execution of extreme maneuvers, improving low-speed handling, lowering the landing speed, or the marked reduction of drag. A good example of a canard-equipped delta-winged aircraft is the Tu-144.

The primary advantage of the delta wing design is that the wing's leading edge remains behind the shock wave generated by the nose of the aircraft when flying at supersonic speeds, which is an improvement on traditional wing designs. While this is also true of highly swept wings, the delta's planform carries across the entire aircraft, allowing it to be built much more strongly than a swept wing, where the spar meets the fuselage far in front of the center of gravity. Generally a delta will be stronger than a similar swept wing, as well as having much more internal volume for fuel and other storage.

The delta-winged Convair F-106 Delta Dart also employes an area ruled fuselage

Another advantage is that as the angle of attack increases the leading edge of the wing generates a vortex which remains attached to the upper surface of the wing, giving the delta a very high stall angle. A normal wing built for high speed use is typically dangerous at low speeds, but in this regime the delta changes over to a mode of lift based on the vortex it generates. The disadvantages, especially marked in the older tailless delta designs, are a loss of total available lift caused by turning up the wing trailing edge or the control surfaces (as required to achieve a sufficient stability) and the high induced drag of this low-aspect ratio type of wing. This causes delta-winged aircraft to 'bleed off' energy very rapidly in turns, a disadvantage in aerial maneuver combat and dogfighting.

Additional advantages of the delta wing are simplicity of manufacture, strength, and substantial interior volume for fuel or other equipment. Because the delta wing is simple, it can be made very robust (even if it is quite thin), and it is easy and relatively inexpensive to build - a substantial factor in the success of the MiG-21 and Mirage aircraft.

Alexander Lippisch, Frenchman Payen, and the DFS (German Institute of Flight) studied a number of ramjet powered (sometimes coal-fueled) delta-wing interceptor aircraft during the war, one progressing as far as a glider prototype. After the war, Lippisch was taken to the US, where he worked at Convair. The Convair engineers became very interested in his interceptor designs, and started work on a larger version known as the F-92. This project was eventually cancelled as impractical, but a prototype flying testbed was almost complete by that point, and was later flown as the XF-92. The design generated intense interest around the world. Soon many aircraft designs, particularly interceptors, were designed around a delta wing. Examples include:

• Avro Vulcan
• Avro Canada CF-105 Arrow
• Dassault Mirage III
• Dassault Mirage IV
• Dassault Mirage 2000
• Dassault Rafale
• Chengdu J-10
• Concorde
• Tu-144
• Convair B-58 Hustler
• Convair F-102 Delta Dagger
• Convair F-106 Delta Dart
• Convair XFY (one of the few propellor-driven delta wing aircraft)
• Eurofighter Typhoon
• Fairey FD-1 Delta
• Fairey FD-2 Delta
• Gloster Javelin
• HAL Tejas
• North American XB-70 Valkyrie
• Lockheed SR-71 Blackbird
• Mikoyan-Gurevich MiG-21 'Fishbed' (a "tailed" delta wing)
• Saab 37 Viggen
• JAS 39 Gripen
• Sukhoi Su-9 'Fishpot'
• Sukhoi Su-11 'Fishpot'
• Sukhoi Su-15 'Flagon' (early models)

Pure deltas fell out of favour somewhat due to their undesirable characteristics, notably flow separation at high angles of attack (swept wings have similar problems), and high drag at low altitudes. This limited them primarily to high-speed, high-altitude interceptor roles. Some modern aircraft, like the F-16, use a cropped delta along with horizontal tail surfaces. A modification, the compound delta such as seen on the Saab Draken fighter or the prototype F-16XL "Cranked Arrow", or the graceful ogee delta used on the Anglo-French Concorde Mach 2 airliner, connected another much more highly swept piece of the delta wing to the forward root section of the main one, to create the high-lift vortex in a more controlled fashion, reduce the drag and thereby allow for landing the delta at acceptably slow speed.

As the performance of jet engines grew, fighters with other planforms could perform as well as deltas, and do so while maneuvering much harder and at a wider range of altitudes. Today a remnant of the compound delta can be found on most fighter aircraft, in the form of leading edge extensions. These are effectively very small delta wings placed so they remain parallel to the airflow in cruising flight, but start to generate a vortex at high angles of attack. The vortex is then captured on the top of the wing to provide additional lift, thereby combining the delta's high-alpha performance with a conventional highly efficient wing planform. Many modern fighter aircraft, such as the JAS 39 Gripen and the Eurofighter Typhoon use a combination of canards and a delta wing.

• Aerodynamics of delta wings
• Analysis of air flow over delta wings