Sources
Help build the largest human-edited directory on the web.
Submit a site - Become an editor
Wikipedia. Licensed under the GNU Free Documentation License.
Are you an expert in this subject? Join the discussion and share your knowledge at Wikipedia.org.
Durham Boat
From Wikipedia, the free encyclopedia
The Durham Boat was a large wooden boat produced by the Durham Boat Company of Durham, Pennsylvania. They were designed by company owner Robert Durham to navigate the Delaware River and thus transport the products produced by the Durham Forges and Durham Mills to Trenton, New Jersey and Philadelphia, Pennsylvania. They were flatbottomed boats with high vertical side which ran parallel to each other up to a point 12 to 14 feet from the boat's ends, where they then tapered. The boats were constructed of 1.25 inch thick planks and measured 60 feet long by 8 feet wide by 42 inches deep. They displaced a draft of 3.5 inches when light and 28 inches when fully loaded. They were designed to be able to carry a maximum load of 17 tons while traveling downstream and two tons while traveling upstream. Thus they could carry 150 barrels of flour or 600 bushels of corn. It took three men to operate the boats. Moving downstream they used 12 foot to 18 foot long "setting poles" mainly for steering and when moving upstream they used these poles to push the boats upriver. The crew walked back and forth on "walking boards" built into the sides of the boats. Some were later fitted for the use of oars. These boats are most famous for their use in Washington's crossing of the Delaware during the American Revolution.