From Wikipedia, the free encyclopedia

A pinched aluminium can, produced from a pulsed magnetic field created by rapidly discharging 2 kilojoules from a high voltage capacitor bank into a 3-turn coil of heavy gauge wire. Source: Bert Hickman, Stoneridge Engineering.

Electromagnetic forming (EM forming or Magneforming) is a type of high energy rate metal forming process that uses pulsed power techniques to create ultrastrong pulsed magnetic fields to rapidly reshape metal parts. The technique is sometimes called high velocity forming.

A rapidly changing magnetic field induces a circulating electrical current within a nearby conductor through electromagnetic induction. The induced current creates a corresponding magnetic field around the conductor (see Pinch (plasma physics)). Because of Lenz's Law, the magnetic fields created within the conductor and work coil strongly repel each other.

In practice the metal "work piece" to be fabricated is placed in proximity to a heavily constructed coil of wire (called the work coil). A huge pulse of current is forced through the work coil by rapidly discharging a high voltage capacitor bank using an ignitron or a spark gap as a switch. This creates a rapidly oscillating, ultrastrong electromagnetic field around the work coil.

The high work coil current (typically tens or hundreds of thousands of amperes) creates ultrastrong magnetic forces that easily overcome the yield strength of the metal work piece, causing permanent deformation. The metal forming process occurs extremely quickly (typically tens of microseconds) and, because of the large forces, portions of the workpiece undergo high acceleration.

The forming process is most often used to shrink or expand cylindrical tubing, but it can also form sheet metal by repelling the work piece onto a shaped die at a high velocity. Since the forming operation involves high acceleration and deceleration, mass of the work piece plays a critical role during the forming process. The process works best with good electrical conductors such as copper or aluminum, but it can be adapted to work with poorer conductors such as steel.

• Materials and Manufacturing: Electromagnetic Forming of Aluminum Sheet. Pacific Northwest National Laboratory. Retrieved on 2006-06-09.
• Electromagnetic Hemming Machine And Method For Joining Sheet Metal Layers. US Patent and Trademark Office. Retrieved on 2005-09-02.
• Resources on Electromagnetic and High Velocity Forming. Department of Materials Science and Engineering, Ohio State University. Retrieved on 2006-04-06.
• Electromagnetic Metal Forming Handbook. An English translation of the Russian book by Belyy, Fertik, and Khimenko. Retrieved on 2006-08-06.

• Theory of Quarter Shrinking (Hobbyist EM Forming Application). Stoneridge Engineering. Retrieved on 2006-06-06.
• Electromagnetic Dent Removal. Electroimpact. Retrieved on 2006-06-06.
• Electromagnetic Forming of Cylindrical Components. Magnet-Physik (Germany. Retrieved on 2006-06-06.

Metalworking:
Metal forming:	Coin die | Coining | Cold rolling | Die | Drawing | Electromagnetic forming | Flypress | Hot rolling | Hydraulic press | Hydroforming | Machine press | Progressive stamping | Progressive die | Punching | Punch press | Rolling | Shear | Sinking | Stamping press | Metal spinning | Swage
Metalworking topics:	Casting | CNC | Cutting tools | Drilling and threading | Fabrication | Finishing | Grinding | Jewellery | Lathe (tool) | Machining | Machine tooling | Measuring | Metalworking | Hand tools | Metallurgy | Milling | Occupations | Press tools | Smithing | Terminology | Welding