Frequency

From Wikipedia, the free encyclopedia

Jump to: navigation, search
Sinusoidal waves of various frequencies; the bottom waves have higher frequencies than those above.
Sinusoidal waves of various frequencies; the bottom waves have higher frequencies than those above.

Frequency is a measure of the number of occurrences of a repeating event per unit time. It is also referred to as temporal frequency.

Contents

Sound is a wave associated with the transmission of mechanical energy through a supporting medium. It can be shown experimentally that sound cannot travel through a vacuum. The energy available in a sound wave disturbs the medium in a periodic manner. Periodicity is important if a sound wave is to carry information. In air, the disturbance propagates as the successive compression and decompression (the latter sometimes called rarefaction) of small regions in the medium. If we generate a pure note and place a detector (our ear, for example) at a point in the surrounding medium, a distance from the source, the number of compression-decompression sequences arriving at the detector during a chosen time interval is called the frequency. The time interval between successive maximal compressions is called the period. The product of the frequency and the wavelength is the velocity.

For cyclical processes, such as rotation, oscillations, or waves, it is defined as a number of cycles, or periods, per unit time. In physics and engineering disciplines, such as optics, acoustics, and radio, frequency is usually denoted by a roman letter f or by a greek letter ν (nu).

The number of wavelengths per second of a particular radiation.

In SI system, the unit of frequency is hertz (Hz), named after the German physicist Heinrich Hertz. For example, 1 Hz means that an event repeats once per second, 2 Hz is twice per second, and so on [1]. This unit was originally called a cycle per second (cps), which is still sometimes used. Heart rate and musical tempo are measured in beats per minute (BPM). Frequency of rotation is often expressed as a number of revolutions per minute (rpm). BPM and rpm values must be divided by 60 to obtain the corresponding value in Hz: thus, 60 BPM translates into 1 Hz.

A related measure of frequency, called angular frequency ω, is often introduced. It is defined as the rate of change in the orientation angle (during rotation), or in the phase of a sinusoidal waveform (e.g. in oscillations and waves): ω = 2πf. Angular frequency is measured in radians per second (s-1).

To calculate the frequency of the event, the number of occurrences of the event within a fixed time interval are counted, and then divided by the length of the time interval.

To calculate the frequency of an event in experimental work however (for example, calculating the frequency of an oscillating pendulum) it is crucial that the time taken for a fixed number of occurrences is recorded, rather than the number of occurrences within a fixed time. This is because your random error is significantly increased performing the experiment the other way around. It [the frequency] is still calculated by dividing the number of occurrences by the time interval, however, the number of occurrences is fixed, not the time interval.

An alternative method to calculate frequency is to measure the time between two consecutive occurrences of the event (the period) and then compute the frequency f as the reciprocal of this time:


f = \frac{1}{T}

where

T= time

A more accurate measurement takes many cycles into account and averages the period between each.

In case when the frequency is so high that counting is difficult or impossible with the available means, another method is used, based on a source (such as a laser, a tuning fork, or a waveform generator) of a known reference frequency f0, that must be tunable or very close to the measured frequency f. Both the observed frequency and the reference frequency are simultaneously produced, and frequency beats are observed at a much lower frequency Δf, which can be measured by counting. This is sometimes referred to as a stroboscope effect. The unknown frequency is then found from f=f_0\pm \Delta f.

Frequency has an inverse relationship to the concept of wavelength,simply,frequency is inversely proportional to wavelength λ. The frequency f is equal to the speed v of the wave divided by the wavelength λ (lambda) of the wave:


f = \frac{v}{\lambda}.

In the special case of electromagnetic waves moving through a vacuum, then v = c, where c is the speed of light in a vacuum, and this expression becomes:


f = \frac{c}{\lambda}.

When waves travel from one medium to another, their frequency remains exactly the same — only their wavelength and speed change.

Apart from being modified by the Doppler effect or any other nonlinear process, frequency is an invariant quantity in the universe. That is, it cannot be changed by any linearly physical process unlike velocity of propagation or wavelength.

  1. ^ Accidentally, 1 hertz is the approximate frequency of a human heart (Herz in German language)

Look up frequency, often in Wiktionary, the free dictionary.
Advanced Search
Included Web Search Engines


Safe Search

close

Top Matching Results

Occasionally Search.com will highlight specialized results that are based on the context of your query. Examples of specialized results include specific links to news, images, or video.

Top Matching Results may highlight information from other Search.com pages, content from the CNET Network of sites, or third party content. The listings are based purely on relevance. Search.com does not receive payment for listings in this section but our partners that provide this data may get paid for listing these products.

Sponsored Links

This section contains paid listings which have been purchased by companies that want to have their sites appear for specific search terms and related content. These listings are administered, sorted and maintained by a third party and are not endorsed by Search.com.

Search Results

Search.com sends your search query to several search engines at one time and integrates the results into one list which has been sorted by relevance using Search.com's proprietary algorithm. You can customize the list of search engines included in your metasearch from the preferences.

The search engines that are used in your metasearch may allow companies to pay to have their Web sites included within the results. To view the Paid Inclusion policy for a specific search engine, please visit their Web site. Search.com does not accept payment or share revenue with any search engine partner for listings in this section.