Sources
Help build the largest human-edited directory on the web.
Submit a site - Become an editor
Wikipedia. Licensed under the GNU Free Documentation License.
Are you an expert in this subject? Join the discussion and share your knowledge at Wikipedia.org.
GNU Debugger
From Wikipedia, the free encyclopedia
 |
It has been suggested that GNU Debugger front-end be merged into this article or section. (Discuss) |
| GNU Debugger | |
|---|---|
 |
|
| Developer: | GNU Project |
| Latest release: | 6.7.1 / October 29, 2007 |
| Genre: | Debugger |
| License: | GPL |
| Website: | gnu.org/software/gdb/ |
The GNU Debugger, usually called just GDB, is the standard debugger for the GNU software system. It is a portable debugger that runs on many Unix-like systems and works for many programming languages, including Ada, C, C++, FreeBASIC, and Fortran.
Contents |
GDB was first written by Richard Stallman in 1986 as part of his GNU system, after his GNU Emacs was "reasonably stable".[1] GDB is free software released under the GNU General Public License (GPL). It was modeled after the Dbx debugger, which came with Berkeley Unix distributions.
From 1990 to 1993 it was maintained by John Gilmore while he worked for Cygnus Solutions.
GDB offers extensive facilities for tracing and altering the execution of computer programs. The user can monitor and modify the values of programs' internal variables, and even call functions independently of the program's normal behavior.
GDB target processors (as of 2003) include: Alpha, ARM, AVR, H8/300, System/370, System 390, X86 and X86-64, IA-64 "Itanium", Motorola 68000, MIPS, PA-RISC, PowerPC, SuperH, SPARC, and VAX.
Lesser-known target processors supported in the standard release have included A29K, ARC, CRIS, D10V, D30V, FR-30, FR-V, Intel i960, M32R, 68HC11, Motorola 88000, MCORE, MN10200, MN10300, NS32K, Stormy16, V850, and Z8000. (Newer releases will likely not support some of these.)
GDB has compiled-in simulators for target processors even for lesser-known target processors such like M32R or V850.
GDB is still actively developed. As of early 2007, the focus is on adding "reversible debugging" support[2] — allowing a debugging session to step backwards, much like rewinding a crashed program to see what happened.
GDB offers a 'remote' mode often used when debugging embedded systems. Remote operation is when GDB runs on one machine and the program being debugged runs on another. GDB can communicate to the remote 'stub' which understands GDB protocol via Serial or TCP/IP.
The same mode is also used by KGDB for debugging a running Linux kernel on the source level with gdb. With kgdb, kernel developers can debug a kernel in much the same way as they debug application programs. It makes it possible to place breakpoints in kernel code, step through the code and observe variables. On architectures where hardware debugging registers are available, watchpoints can be set which trigger breakpoints when specified memory addresses are executed or accessed. kgdb requires an additional machine which is connected to the machine to be debugged using a serial cable or ethernet. On FreeBSD, it is also possible to debug using Firewire DMA.
The debugger does not contain its own graphical user interface, and defaults to a command-line interface. Several front-ends have been built for it, such as DDD, Eclipse CDT, Xcode debugger, GDBtk/Insight and the "GUD mode" in GNU Emacs. These offer facilities similar to debuggers found in integrated development environments.
GDB does not correctly support C++ templates. [3]
Some other debugging tools have been designed to work with GDB, such as memory leak detectors.
| $ gdb prog.out | debug prog.out (from the shell) |
|---|---|
| gdb> run -v | run the loaded program with the parameters |
| gdb> bt | backtrace (in case the program crashed) |
| gdb> info registers | dump all registers |
| gdb> disass $pc-32 $pc+32 | disassemble |
This is an example GDB session on the example program in Stack trace:
GNU gdb Red Hat Linux (6.3.0.0-1.21rh) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-redhat-linux-gnu"...Using host libthread_db library "/lib/libthread_db.so.1". (gdb) run Starting program: /home/sam/programming/crash Reading symbols from shared object read from target memory...done. Loaded system supplied DSO at 0xc11000 This program will demonstrate gdb Program received signal SIGSEGV, Segmentation fault. 0x08048428 in function_2 (x=24) at crash.c:22 22 return *y; (gdb) edit (gdb) shell gcc crash.c -o crash -gstabs+ (gdb) run The program being debugged has been started already. Start it from the beginning? (y or n) y warning: cannot close "shared object read from target memory": File in wrong format `/home/sam/programming/crash' has changed; re-reading symbols. Starting program: /home/sam/programming/crash Reading symbols from shared object read from target memory...done. Loaded system supplied DSO at 0xa3e000 This program will demonstrate gdb 24 Program exited normally. (gdb) quit
The program is being run. After the cause of the segmentation fault is found, the program is edited to use the correct behavior. The corrected program is recompiled with GCC and then run.
- Binary File Descriptor library (libbfd)
- ^ Richard Stallman lecture at the Royal Institute of Technology, Sweden (1986-10-30). Retrieved on 2006-09-21. “Then after GNU Emacs was reasonably stable, which took all in all about a year and a half, I started getting back to other parts of the system. I developed a debugger which I called GDB which is a symbolic debugger for C code, which recently entered distribution. Now this debugger is to a large extent in the spirit of DBX, which is a debugger that comes with Berkeley Unix.”
- ^ GDB and Reversible Debugging. Retrieved on 2007-03-01. “Reversible debugging (the ability to "step backwards" through a program) is an obviously powerful tool. GDB does not support it today, but the foundations have been laid, and the GDB maintainers are looking for contributors interested in expanding those foundations.”
- ^ Debug problems when there are multiple expansions of same template. GDB Bug Database (2007-03-16). Retrieved on 2007-06-08.
- Richard M. Stallman, Roland Pesch, Stan Shebs, et al., Debugging with GDB (Free Software Foundation, 2002) ISBN 1-882114-88-4
- The documentation of gdb: "Debugging with GDB" (html and >400 pages as pdf)
- GDB Internals
- Peter Jay Salzman's GDB guide: Using GNU's GDB Debugger
|
|
||
|---|---|---|
| History | GNU Manifesto · GNU Project · Free Software Foundation · History of free software |  |
| GNU licences | GNU General Public License · GNU Lesser General Public License · GNU Free Documentation License · GPL linking exception | |
| Software | GNU (Variants) · GNOME · Gnuzilla · Gnash · Bash · GCC · GNU Emacs · glibc · Coreutils · GNU build system · Other GNU packages and programs | |
| Speakers | Robert J. Chassell · Loïc Dachary · Ricardo Galli · Georg C. F. Greve · Federico Heinz · Benjamin Mako Hill · Bradley M. Kuhn · Eben Moglen · Brett Smith · Richard Stallman · John Sullivan | |