Sources
Help build the largest human-edited directory on the web.
Submit a site - Become an editor
Wikipedia. Licensed under the GNU Free Documentation License.
Are you an expert in this subject? Join the discussion and share your knowledge at Wikipedia.org.
Gaseous fire suppression
From Wikipedia, the free encyclopedia
 |
This article does not cite any references or sources. (July 2007) Please help improve this article by adding citations to reliable sources. Unverifiable material may be challenged and removed. |
Gaseous fire suppression is a term to describe the use of inert gases and chemical agents to extinguish a fire. The system typically consists of the agent, agent storage containers, agent release valves, fire detectors, fire detection system (wiring control panel, actuation signaling), agent delivery piping, and agent dispersion nozzles.
Less typically, the agent may be delivered by means of solid propellant gas generators that produce either inert or chemically active gas.
Contents |
There are four means used by the agents to extinguish a fire. They act on the "Fire tetrahedron":
- Reduction or isolation of fuel
- No agents currently use this as the primary means of fire suppression.
- Reduction of heat
- Representative agents: Novec 1230.
- Reduction or isolation of oxygen
- Representative agents: Argonite / IG-55, Carbon Dioxide, Inergen™, and NN100.
- Inhibiting the chain reaction of the above components
- Representative agents: FE-13, FE-227, FE-241, FE-25, FE-36, FM-200, Halons, Halon 1301, Freon 13T1, NAF P-IV, NAF S-III, and Triodide™ (Trifluoroiodomethane).
Broadly speaking, there are two methods for applying an extinguishing agent: total flooding and local application.
Systems working on a total flooding principle apply an extinguishing agent to a three dimensional enclosed space in order to achieve a concentration of the agent (volume percent of the agent in air) adequate to extinguish the fire. These types of systems may be operated automatically by detection and related controls or manually by the operation of a system actuator.
Systems working on a local application principle apply an extinguishing agent directly onto a fire (usually a two dimensional area), or into the three dimensional region immediately surrounding the substance or object on fire. The main difference in local application from total flooding design is the absence of physical barriers enclosing the fire space.
In the context of automatic extinguishing systems, local application does normally not refer to the use of manually operated wheeled or portable fire extinguishers, although the nature of the agent delivery is similar.
Systems using certain agents, such as carbon dioxide, in enclosed spaces presents a risk of suffocation. Numerous incidents have occurred where individuals in these spaces have been killed by carbon dioxide agent release. To prevent such occurrences, additional life safety systems are typically installed with a warning alarm that precedes the agent release. The warning, usually an aural and visible alert, advises the immediate evacuation of the enclosed space. After a preset time, the agent starts to discharge. Accidents have also occurred during maintenance of these systems, so proper safety precautions must be taken beforehand.[1]
|
|
|
|---|---|
| General: Active fire protection — Fire alarm system Fire suppression: Fire extinguisher — Fire sand bucket — Fire sprinkler — Gaseous fire suppression |
  |