Sources
Help build the largest human-edited directory on the web.
Submit a site - Become an editor
Wikipedia. Licensed under the GNU Free Documentation License.
Are you an expert in this subject? Join the discussion and share your knowledge at Wikipedia.org.
Hole punch
From Wikipedia, the free encyclopedia
- For the industrial drilling of holes through many sheets of paper, see paper drilling.
A hole punch (known also as a hole puncher, paper puncher or rarely perforator) is a common office tool, that is used to create holes in sheets of paper, often for the purpose of collecting the sheets in a binder.
Contents |
The origins of the humble paper punch goes back to Germany, where two early patents for a device that is designed to "punch holes in paper." have been discovered. [1] Friedrich Soennecken made his patent on November 14, 1886 for his Papierlocher für Sammelmappen. [2]
A typical hole punch, whether a single or multiple hole punch, has a long lever which is used to push a bladed cylinder straight through a number of sheets of paper. As the vertical travel distance of the cylinder is only a few millimeters, it can be positioned within a centimeter of the lever fulcrum. For low volume hole punches, the resulting lever need not be more than 8 cm for sufficient force.
Two paper guides are needed to line up the paper: one opposite where the paper is inserted, to set the margin distance, and one adjacent side.
Hole punches for industrial volumes — hundreds of sheets — feature very long lever arms, but function identically.
The most common standard for the dimensions and location of filing holes punched in paper is International Standard ISO 838. Two holes with a diameter of 6±0.5 mm are punched into the paper. The centers of these holes are 80±0.5 mm apart and have a distance of 12±1 mm to the nearest edge of the paper. The holes are located symmetrically in relation to the axis of the sheet or document. The guides in the hole punch will help keep the paper in a straight line that will keep you papers from becoming a mess.
Any paper format that is at least 100 mm high (e.g., ISO A7 and larger) can be filed using this system. A printed document with a margin of 20–25 mm will accommodate ISO 838 filing holes.
A four-hole extension of ISO 838 (not specified by ISO), is also commonly used. The two middle holes are those defined by ISO 838, and so paper punched with the four holes can be filed in binders that are consistent with ISO 838. The two additional holes are located 80 mm above and below these. The use of two additional holes provides more stability. This extension is sometimes referred to as the "888" system, because of the three 8-cm gaps between the holes. Some 2-hole punches have an "888" marking on their paper guide, to assist punching with them all four holes into A4 paper.
In regions that use the U.S. "Letter" paper format (216×279 mm; United States, Canada, and in part Mexico and the Philippines), a three-hole standard is widely used. The holes are positioned symmetrically, with the centres 108 mm (4-1/4 in) apart. The diameter of the holes varies between manufacturers, with typical values being 6–8 mm (1/4 to 5/16 inch). The distance of the hole center to the paper edge also varies, with 12 mm (1/2 inch) being a typical value. Unlike ISO 838, this 3-hole system appears to have no well-established exact specification. It can only be applied to paper formats that are at least 240 mm high.
Another standard also occasionally used in the United States is a filebinder system. Its two holes are positioned symmetrically, with the centres 70 mm (2-3/4 inch) apart.
In Sweden, a four-hole standard called triohålning is almost exclusively used. The centres of the holes are 21mm, 70mm and 21 mm apart.
The guides help keep the paper in a straight line
Single hole punches are often used to punch tickets, which indicates its credit has been used.
There are hole punchers that make holes of various geometric shapes, or silhouettes of objects or animals. These are used to punch decorative holes along the edges of pieces of paper, and for making confetti, when creating scrapbooks and other paper crafts.
A related office tool is the eyelet punch. This is a single-hole punch which also presses a metal fastening loop around the hole. It is used to permanently secure a few sheets of paper together which must not be separated or modified.
There are hole punchers that make one, two, three, four, five, six, seven or eight holes at one time, the placement of which matches the spacing of the rings in a binder.
With a few exceptions, two-hole and four-hole punches consistent with ISO 838 are the norm.
In the United States the three-hole punch is most common. Less frequently seen is the two-hole filebinder punch.
There are office models available for the perforation of 1 to 150 sheets of paper, and industrial models for up to 470 sheets. Most multiple-hole and many single-hole punches accumulate the waste paper circles in a chamber, which must be periodically emptied in order to facilitate the continued operation of the punch.
| This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (December 2007) |