Wireless network interface card
From Wikipedia, the free encyclopedia
A wireless network interface controller (WNIC) is a network card which connects to a radio-based computer network, unlike a regular network interface controller (NIC) which connects to a wire-based network such as token ring or ethernet. A WNIC, just like a NIC, works on the Layer 1 and Layer 2 of the OSI Model. A WNIC is an essential component for wireless desktop computer. This card uses an antenna to communicate through microwaves. A WNIC in a desktop computer usually is connected using the PCI bus. Other connectivity options are USB and PC card. Integrated WNIC's are also available, (typically in Mini PCI/PCI Express Mini Card form).
A WNIC can operate in two modes known as infrastructure mode and ad hoc mode.
In an infrastructure mode network the WNIC needs an access point: all data is transferred using the access point as the central hub. All wireless nodes in an infrastructure mode network connect to an access point. All nodes connecting to the access point must have the same service set identifier (SSID) as the access point, and if the access point is enabled with WEP they must have the same WEP key or other authentication parameters.
In an ad-hoc mode network the WNIC doesn't require an access point, but rather can directly interface with all other wireless nodes directly. All the nodes in an ad-hoc network must have the same channel and SSID.
WNICs are designed around the IEEE 802.11 standard which sets out low-level specifications for how all wireless networks operate. Earlier interface controllers are usually only compatible with earlier variants of the standard, while newer cards support both current and old standards.
Specifications commonly used in marketing materials for WNICs include:
- Wireless data transfer rates (measured in Mbit/s); these range from 2 Mbps to 54 Mbps.[1]
- Wireless transmit power (measured in dBm)
- Wireless network standards (may include standards such as 802.11b, 802.11g, etc.) 802.11g offers data transfer speeds equivalent to 802.11a – up to 54 Mbps – and the wider 300-foot range of 802.11b, and is backward compatible with 802.11b.
| Protocol | Release Date | Op. Frequency | Throughput (Typ) | Data Rate (Max) | Modulation Technique | Range (Radius Indoor)
Depends, # and type of walls |
Range (Radius Outdoor)
Loss includes one wall |
|---|---|---|---|---|---|---|---|
| Legacy | 1997 | 2.4 GHz | 0.9 Mbit/s | 2 Mbit/s | ~20 Meters | ~100 Meters | |
| 802.11a | 1999 | 5 GHz | 23 Mbit/s | 54 Mbit/s | OFDM | ~35 Meters | ~120 Meters |
| 802.11b | 1999 | 2.4 GHz | 4.3 Mbit/s | 11 Mbit/s | DSSS | ~38 Meters | ~140 Meters |
| 802.11g | 2003 | 2.4 GHz | 19 Mbit/s | 54 Mbit/s | OFDM | ~38 Meters | ~140 Meters |
| 802.11n | June 2009[2] (est.) |
2.4 GHz 5 GHz |
74 Mbit/s | 248 Mbit/s | ~70 Meters | ~250 Meters | |
| 802.11y | June 2008[2] (est.) |
3.7 GHz | 23 Mbit/s | 54 Mbit/s | ~50 Meters | ~5000 Meters |
Wireless range may be substantially affected by objects in the way of the signal and by the quality of the antenna. Large electrical appliances, such as a refrigerators, fuse boxes, metal plumbing, and air conditioning units can block a wireless network signal. The theoretical maximum range is only reached under ideal circumstances and true effective range is typically about half of the theoretical range.[1] Specifically, the maximum throughput speed is only achieved at extremely close range (less than 25 feet or so); at the outer reaches of a device's effective range, speed may decrease to around 1 Mbps before it drops out altogether. The reason is that wireless devices dynamically negotiate the top speed at which they can communicate without dropping too many data packets.