From Wikipedia, the free encyclopedia

It has been suggested that FCode be merged into this article or section. (Discuss)

Open Firmware, or OpenBoot in Sun Microsystems parlance, is a standard defining the interfaces of a computer firmware system, formerly endorsed by the IEEE. It originated at Sun, and is used by Sun, Apple, IBM, and most other non-x86 PCI chipset vendors. Open Firmware allows the system to load platform-independent drivers directly from the PCI card, improving compatibility. The proposed Power Architecture Platform Reference will also be Open Firmware based.

Open Firmware may be accessed through its Forth language shell interface. It achieves essentially the same functionality as the later EFI standard initiated at Intel, with lower overhead.

Open Firmware is described by IEEE standard IEEE 1275-1994, which was not reaffirmed by the Open Firmware Working Group (OFWG) since 1998 and has therefore been officially withdrawn by IEEE.

Several commercial implementations of Open Firmware have been released to the Open Source community in 2006, including Sun OpenBoot, Firmworks OpenFirmware and Codegen SmartFirmware. The source code is available from the OpenBIOS project. Sun's implementation is available under a BSD license.^[1]

Because the Open Firmware Forth code is compiled into FCode (a bytecode) and not into the machine language of any particular computer architecture, Open Firmware code included in, say, an I/O card can be executed by any system that uses Open Firmware. In this way, an I/O card can provide boot-time diagnostics, configuration code, and device drivers that will be usable on any system running Open Firmware, allowing many of the same I/O cards to be used on Sun systems and Macintoshes.

Being based upon an interactive programming language, Open Firmware can be used to quickly test and bring up new hardware.

On Sun SPARC systems, the Open Firmware interface is displayed on the console terminal before the bootstrapping of the system software. If a keyboard is connected, the main video display will be used as the console terminal and Open Firmware can be re-entered at any time by pressing Stop-A (L1-A) on the keyboard. If no keyboard is connected, then the first serial line on the system is usually used as the console and Open Firmware is re-entered by sending a "Break" on the serial line. While the system software is running, various Open Firmware settings can be read or written using the eeprom command.

On a PowerPC-based Macintosh, the Open Firmware interface can be accessed by pressing the keys Cmd-Option-O-F at startup.^[2] This functionality is generally only used by developers or troubleshooting I.T. personnel; for common users, the Mac OS X operating system provides a high level graphical user interface to change commonly used Open Firmware settings. For instance, it is possible to specify the boot disk or partition without directly using the Open Firmware interface. Other Open Firmware settings can be changed using the nvram command while the system software is running.

On Pegasos, the interface is accessed by pressing Esc at startup.

On IBM POWER systems, Open Firmware ("ok" prompt) can be accessed through the SMS Boot Menu. SMS Boot Menu can be accessed by pressing "1" or "F1" during the boot sequence, after hardware checking, and just before the OS boot.

Free software Portal

• Firmware
• BIOS
• Extensible Firmware Interface (EFI)
• Unified Extensible Firmware Interface (UEFI)
• OpenBIOS, another implementation of the Open Firmware standard
• LinuxBIOS, a project which aims to create a free BIOS that can run 32-bit operating systems like Linux
• Input/Output Base Address
• Advanced Configuration and Power Interface (ACPI)
• BIOS boot devices
• BIOS Interrupt Calls
• Power-On Self Test (POST)

• 1275 Open Firmware Home Page
• http://playground.sun.com/1275/mejohnson/
• http://www.codegen.com/SmartFirmware/
• http://www.firmworks.com
• http://www.openfirmware.org
• http://www.openbios.org
• http://sunsolve.sun.com/data/802/802-3242/html/TOC.html SUN's SPARC OBP documentation
• http://www.complang.tuwien.ac.at/forth/1275.ps.gz The last IEEE 1275 text
• http://www.openbios.org/viewvc/?root=OpenFirmware Firmworks OpenFirmware source code
• http://www.openbios.org/viewvc/?root=SmartFirmware Codegen SmartFirmware source code
• http://www-941.ibm.com/collaboration/wiki/display/WikiPtype/Boot+Process+on+POWER Boot Process on IBM POWER

1. ^ http://laptop.media.mit.edu/laptopnews.nsf/2e76a5a80bc36cbf85256cd700545fa5/2cc25a58f0d1a6e8852572070033befc?OpenDocument
2. ^ Intel-based Macintoshes do not use Open Firmware; they use Extensible Firmware Interface. See also: Apple's transition to Intel processors. Also, early versions (before the PowerBook 3400) connect Open Firmware's input and output to the Modem port by default.