From Wikipedia, the free encyclopedia

A Phase Change Material (PCM) is a substance with a high heat of fusion which, melting and solidifying at certain temperatures, is capable of storing or releasing large amounts of energy.

Contents 1 Applications 2 Behavior 3 Technology 4 Micro-Encapsulated Phase Change Materials 5 Fire and Safety Issues 6 External links

Phase change materials have been employed in, for example:

• Thermal energy storage
• Conditioning of buildings, such as 'ice-storage'
• Waste heat recovery
• Off peak power utilization
• Heat pump systems
• Space applications
• Laptop computer cooling
• Coolsuits
• Telecom shelters

The only phase change used for PCMs is the solid-liquid change. Liquid-gas PCMs are not practical for use as thermal storage due to the large volumes or high pressures required to store the materials when in their gas phase. Liquid-gas PCMs do have a higher heat of transformation than solid-liquid PCMs.

Initially, the solid-liquid PCMs perform like conventional storage materials; their temperature rises as they absorb heat. Unlike conventional storage materials, however, when PCMs reach the temperature at which they change phase (their melting point) they absorb large amounts of heat without a significant rise in temperature. When the ambient temperature around a liquid material falls, the PCM solidifies, releasing its stored latent heat. Within the human comfort range of 20° to 30°C, some PCMs are very effective. They store 5 to 14 times more heat per unit volume than conventional storage materials such as water, masonry, or rock.

The most commonly used PCMs are salt hydrides, fatty acids and esters, and various paraffins (such as octadecane). Recently also ionic liquids were investigated as novel PCMs.

Phase change materials perform best in small containers, which therefore are usually divided in cells. The cells are shallow to reduce static head - based on the principle of shallow container geometry. The packaging material should conduct heat well; and it should be durable enough to withstand frequent changes in the storage material's volume as phase changes occur. It should also restrict the passage of water through the walls, so the materials will not dry out (or water-out, if the material is hygroscopic). Packaging must also resist leakage and corrosion. Steel and polyethylene are common packaging materials.

Currently, phase change materials (PCMs) are very widely used in tropical regions in telecom shelters. They protect the high-value equipment in the shelter by keeping the indoor air temperature below the maximum permissible by absorbing heat generated by power-hungry equipment such as a Base Station Subsystem. In case of a power failure to conventional cooling systems, PCMs minimize use of Diesel generators, and this can translate into enormous savings across thousands of telecom sites in tropics.

Some innovative organic phase change materials are supplied by Rubitherm, and PCM Energy has inorganic phase change materials especially suitable for telecom shelters. Some other manufacturers that specialized in phase change materials include Climator of Sweden and IOLITEC of Germany.

Microencapsulated PCMs provide a portable heat storage system. By coating a microscopic sized PCM with a protective coating, the particles can be suspended within a continuous phase such as water. This system can be considered a phase change slurry (PCS).

Some phase change materials are suspended in water, and are relatively nontoxic. Others are hydrocarbons or other flammable materials, or are toxic. As such, PCMs must be selected and applied very carefully, in accordance with fire and building codes and sound engineering practices. Because of the increased fire risk, flamespread, smoke, potential for explosion when held in containers, and liability, it may be wise not to use flammable PCMs within residential or other regularly occupied buildings.

• Phase Change Material Telecom Shelters
• Phase Change Cooling Vests
• Phase Change Material Manufacturer