Related Directory Categories
- Devices (258)
- Fuel Cells (137)
- Fans and Cooling Devices (71)
- Internal Combustion Engines (70)
- Switching Devices (60)
- Ratchet & Clank Series (60)
- Device Drivers (42)
- Communications Devices and Networking (40)
- Pointing Devices (36)
- Assistive Listening Devices (33)
Sources
Help build the largest human-edited directory on the web.
Submit a site - Become an editor
Wikipedia. Licensed under the GNU Free Documentation License.
Are you an expert in this subject? Join the discussion and share your knowledge at Wikipedia.org.
Ratchet (device)
From Wikipedia, the free encyclopedia
In mechanical engineering, a ratchet is a device that allows linear or rotary motion in only one direction, while preventing motion in the opposite direction. This behavior is useful in many mechanisms, including clocks, capstans, turnstiles, spanners, winders, cable ties, jacks, and hoists.
Contents |
Ratchets have the form of a gearwheel or linear rack with teeth, and a pivoting springloaded finger called a pawl (or in horology a click[1]) that engages the teeth. Either the teeth, or the pawl, are slanted at an angle, so that when the teeth are moving in one direction, the pawl slides up and over each tooth in turn, with the spring forcing it back with a 'click' into the depression before the next tooth. When the teeth are moving in the other direction, the angle of the pawl causes it to catch against a tooth and stop further motion in that direction.
Because the ratchet's teeth can only stop 'backward' motion at discrete points, a ratchet does allow a limited amount of 'backward' motion, or backlash, to a maximum of the spacing between its teeth. Where it is desired to eliminate this, a smooth toothless ratchet with a high friction surface like rubber is sometimes used. The pawl bears against this at an angle. Any backward motion causes the pawl to catch on the surface by friction, preventing backward motion with very little backlash.
- ^ Know your terminology - Clocks. Hints and Tips. British Horological Institute. Retrieved on 2007-12-2.
