UMTS-TDD

From Wikipedia, the free encyclopedia

(Redirected from UTRA TDD-HCR)
Jump to: navigation, search
Mobile communication standards
3GPP: GSM / UMTS Family
2G
3G
Pre-4G
3GPP2: cdmaOne / CDMA2000 Family
2G
3G
Pre-4G
Widely Used Other Technologies
1G
2G
Other Technologies
0G
1G
2G
Pre-4G
Frequency bands

UMTS-TDD is a mobile data network standard built upon the UMTS 3G cellular mobile phone standard, using a TD-CDMA, TD-SCDMA, or other 3GPP-approved, air interface that uses Time Division Duplexing to duplex spectrum between the up-link and down-link. While a full implementation of UMTS, it is mainly used to provide Internet access in circumstances similar to those where WiMAX might be used. UMTS-TDD is not directly compatible with UMTS: a device designed to use one standard cannot, unless specifically designed to, work on the other, because of the difference in air interface technologies and frequencies used.

Contents

TD-CDMA is the primary air interface used by UMTS-TDD. It uses increments of 5MHz of spectrum, with each slice divided into 10ms frames containing fifteen time slots (1500 per second). The time slots are allocated in fixed percentage for downlink and uplink. Code Division Multiple Access is used within each time slot to multiplex streams from or to multiple transceivers.[1]

TD-CDMA is an IMT-2000 3G air interface, classified as IMT-TD Time-Division, and is standardized in UMTS by the 3GPP as UTRA TDD-HCR. TD-CDMA is closely related to W-CDMA, and provides the same types of channels where possible. W-CDMA's HSDPA/HSUPA enhancements are also implemented under TD-CDMA.[2]

An alternative air interface for UMTS-TDD is TD-SCDMA, which uses 1.6MHz slices of spectrum, and is standardized in UMTS by the 3GPP as UTRA TDD-LCR.

In Europe, CEPT allocated the 2010-2020MHz range for a variant of UMTS-TDD designed for unlicensed, self-provided use.[3] Some telecom groups and jurisdictions have proposed withdrawing this service in favour of licensed UMTS-TDD,[4][5] due to lack of demand, and lack of development of a UMTS TDD air interface technology suitable for deployment in this band.

Ordinary UMTS uses a W-CDMA air interface technology and Frequency Division Duplexing, meaning that the up-link and down-link transmit on different frequencies. UMTS is usually transmitted on frequencies assigned for 1G, 2G, or 3G mobile telephone service in the countries of operation.

UMTS-TDD uses time division duplexing, allowing the up-link and down-link to share the same spectrum. This allows the operator to more flexibly divide the usage of available spectrum according to traffic patterns. For ordinary phone service, you would expect the up-link and down-link to carry approximately equal amounts of data (because every phone call needs a voice transmission in either direction), but Internet-oriented traffic is more frequently one-way. For example, when browsing a website, the user will send commands, which are short, to the server, but the server will send whole files, that are generally larger than those commands, in response.

UMTS-TDD tends to be allocated frequency intended for mobile/wireless Internet services rather than used on existing cellular frequencies. This is, in part, because TDD duplexing is not normally allowed on cellular, PCS/PCN, and 3G frequencies. TDD technologies open up the usage of left-over unpaired spectrum.

Europe-wide, several bands are provided either specifically for UMTS-TDD or for similar technologies. These are 1900MHz and 1920MHz and between 2010MHz and 2025MHz. In several countries the 2500-2690 MHz band (also known as MMDS in the USA) have been used for UMTS-TDD deployments. Additionally, spectrum around the 3.5GHz range has been allocated in some countries, notably Britain, in a technology-neutral environment.

UMTS-TDD has been deployed for public and/or private networks in at least nineteen countries around the world, with live systems in, amongst other countries, Australia, Czech Republic, France, Germany, Japan, New Zealand, South Africa, the UK, and the USA.[6]

Deployments in the US thus far have been limited. It has been selected for a public safety support network used by emergency responders in New York,[7] but outside of some experimental systems, notably one from Nextel, thus far the WiMAX standard appears to have gained greater traction as a general mobile Internet access system.

A variety of wireless, mobile Internet-access systems exist which provide broadband speed access to the Internet. These include WiMAX and HIPERMAN. UMTS-TDD has the advantages of being able to use an operator's existing UMTS/GSM infrastructure, should it have one, and that it includes UMTS modes optimized for circuit switching should, for example, the operator want to offer telephone service. UMTS-TDD's performance is also more consistent. However, UMTS-TDD deployers often have regulatory problems with taking advantage of some of the services UMTS compatibility provides. For example, UMTS-TDD spectrum in the UK cannot be used to provide telephone service, though the regulator OFCOM is discussing the possibility of allowing it at some point in the future. Few operators considering UMTS-TDD have existing UMTS/GSM infrastructure.

Additionally, the WiMAX and HIPERMAN systems provide significantly larger bandwidths when the mobile station is in close proximity to the tower.

Like most mobile Internet access systems, many users who might otherwise choose UMTS-TDD will find their needs covered by the ad hoc collection of unconnected Wifi access points at many restaurants and transportation hubs, and/or by Internet access already provided by their mobile phone operator. By comparison, UMTS-TDD (and systems like WiMAX) offers mobile, and more consistent, access than the former, and generally faster access than the latter.

 v • d • e 
Comparison of Mobile Internet Access methods
Standard Family Primary Use Radio Tech Downlink (Mbps) Uplink (Mbps) Notes
802.16e WiMAX Mobile Internet MIMO-SOFDMA 70 70 Quoted speeds only achievable at very short ranges, more practically 10 Mbps at 10 km.
HIPERMAN HIPERMAN Mobile Internet OFDM 56.9 56.9
WiBro WiBro Mobile Internet OFDMA 50 50 Mobile range (900 m)
iBurst iBurst 802.20 Mobile Internet HC-SDMA/TDD/MIMO 64 64 3-12 km
EDGE Evolution GSM Mobile Internet TDMA/FDD 1.9 0.9 3GPP Release 7
UMTS W-CDMA
HSDPA+HSUPA
HSPA+		 UMTS/3GSM Mobile phone CDMA/FDD

CDMA/FDD/MIMO		 .384
14.4
42		 .384
5.76
11.5		 HSDPA widely deployed. Typical downlink rates today 1-2Mbps, ~200kbps uplink; future downlink up to 28.8Mbps.
UMTS-TDD UMTS/3GSM Mobile Internet CDMA/TDD 16 16 Reported speeds according to IPWireless using 16QAM modulation similar to HSDPA+HSUPA
LTE UMTS UMTS/4GSM General 4G OFDMA/MIMO/SC-FDMA (HSOPA) >100 >50 Still in development
1xRTT CDMA2000 Mobile phone CDMA 0.144 0.144 Obsoleted by EV-DO
EV-DO 1x Rev. 0
EV-DO 1x Rev.A
EV-DO Rev.B		 CDMA2000 Mobile Internet CDMA/FDD 2.45
3.1
4.9xN		 0.15
1.8
1.8xN		 Rev B note: N is the number of 1.25 MHz chunks of spectrum used. Not yet deployed.

Notes: All speeds are theoretical maximums and will vary by a number of factors, including the use of external antennae, distance from the tower and the ground speed (i.e. communications on a train may be poorer than when standing still.) Usually the bandwidth is shared between several terminals. The performance of each technology is determined by a number of constraints, including the spectral efficiency of the technology, the cell sizes used, and the amount of spectrum available. For more information, see Comparison of wireless data standards.

  1. ^ UMTS World TD-CDMA information
  2. ^ IPWireless press release on TD-CDMA chipset supporting HSDPA
  3. ^ ERC/DEC/(99)25 EU Recommendation on UMTS TDD, Annex 1, points 5 and 6
  4. ^ UMTS Forum on RSC Questionaire concerning future of 2010-2025MHz band (PDF)
  5. ^ OFCOM report on IMT-2000 spectrum
  6. ^ UMTS-TDD Alliance list of Deployments
  7. ^ Northrop Grumman Wins $500 Million New York City Broadband Mobile Wireless Contract
v • d • e
Internet access methods
Wired: Dial-up, ISDN, DSL, Cable, Fiber optic, Power-line internet
Wireless: Wi-Fi, Bluetooth, DECT, WiBro, WiMAX, UMTS-TDD, HSPA, EV-DO, Satellite
Retrieved from "http://en.wikipedia.org/wiki/UMTS-TDD"
Advanced Search
Included Web Search Engines


Safe Search

close

Top Matching Results

Occasionally Search.com will highlight specialized results that are based on the context of your query. Examples of specialized results include specific links to news, images, or video.

Top Matching Results may highlight information from other Search.com pages, content from the CNET Network of sites, or third party content. The listings are based purely on relevance. Search.com does not receive payment for listings in this section but our partners that provide this data may get paid for listing these products.

Sponsored Links

This section contains paid listings which have been purchased by companies that want to have their sites appear for specific search terms and related content. These listings are administered, sorted and maintained by a third party and are not endorsed by Search.com.

Search Results

Search.com sends your search query to several search engines at one time and integrates the results into one list which has been sorted by relevance using Search.com's proprietary algorithm. You can customize the list of search engines included in your metasearch from the preferences.

The search engines that are used in your metasearch may allow companies to pay to have their Web sites included within the results. To view the Paid Inclusion policy for a specific search engine, please visit their Web site. Search.com does not accept payment or share revenue with any search engine partner for listings in this section.